Adds the additional column to the query

Adds the additional column to the query

Adds the additional columns to the query

Adds the additional columns to the query

Adds the additional columns to the query

Adds the additional filter column to the query

Adds the given having condition

Adds the additional column to the query

Adds the additional column to the query

Adds the additional columns to the query

Adds the additional columns to the query

Adds the additional columns to the query

Adds the given where condition to the final where condition

Adds the given where condition

Ensures that there is no restriction applied for the result.

Ensures that all culture versions of the documents are retrieved.

Returns true if distribution of TOP N to inner queries is allowed

Changes the where operator to AND for subsequent where conditions. Use in combination of methods Where...

Adds the given where condition with the AND operator

Adds the given where condition with the AND operator. Creates a new where condition object and runs the setup actions on it.

Returns true if the object has any settings defined that influence the resulting query

Applies top N based on paging settings to the inner query to select only necessary data

Applies this query parameters to the target object

Applies main query properties to the given query to ensure synchronized state before execution

Applies the given settings to the query

Applies the given settings to the query

Applies TOP N settings to the given query if it is more restrictive than the current query settings.

Changes the type of the query to another type

Converts the query to the query column using this query as nested

Creates an ID query from the given query

Makes a materialized list from the given query

Creates a nested query from the given query

Creates a nested query from the given query

Creates a single column query from the given query

Modifies the query to be able to be used as a sub-query, e.g. for usage in WHERE A IN ([query]). Ensures single column result, and removes order by from the result.

Gets a query expression representing this object as a value

Sets whether the binary data should be included to the result

Builds a multi-query from the given list of queries

Marks the object as changed

Ensures that the result will be filtered based on user Read permission.

Checks if where condition results in no data

Creates the clone of the object.

Creates the clone of the object.

Sets the column to select

Sets the column to select

Sets the columns to select

Sets the columns to select

Sets the columns to select

The data will be combined with documents in any culture if not translated to the requested one(s). When several cultures are required, the order is taken in account as a priority for documents with several matching language versions followed by any other language version. If no culture specified, the highest priority has site preferred culture, second the default culture followed by the rest of site cultures.

The data will be combined with documents in site default culture if not translated to the requested one(s). When several cultures are required, the order is taken in account as a priority for documents with several matching language versions.

Copies the properties to the target query.

Creates the child collection based on the given provider

Creates query for the given type

Filters the data to include only documents translated to given culture(s).

Marks the object as changed when data source changes

Ensures default restrictions for the result.

Sets the query to use distinct selection over the given columns

Ensures data parameters for the given query

Ensures the queries for the given types

Ensures the queries for the given types

Ensures the query with the given type

Determines whether the specified Object is equal to the current Object.

Gets the intersection of this data query with another query

Filters the data to include only site objects, but not global objects

Filters the data to exclude documents on given path(s).

Filters the data to exclude documents on given path.

Executes the current query and returns it's results as a DataSet.

Executes the current query and returns it's results as an IDataReader. The SupportsReader flag indicates whether this operation is supported.

Asynchronously executes the current query and returns it's results as an IDataReader. The SupportsReader flag indicates whether this operation is supported.

Expands the expression by replacing parameters with their values

Expands the columns within this query

Ensures that duplicate document are filtered from the result. This means that linked documents are not retrieved, if there is the original document already included in the results.

Executes the given action for each page (DataSet) in the results. If the query is not set up as a paged query before calling this method and pageSize is not set, executes the action once with the current results.

Executes the given action for each item (DataRow) in the result. Processes the items in batches of the given size.

Defines the source of the data (table, view or a nested query)

Gets the list of all available columns for this query

Gets the binary columns for this query

Gets the class name for current query

Gets the class structure info for this query

Returns query parameter container filled with the complete settings of current query.

Gets the complete parameters for the query execution

Executes the query. Sets the total records number during execution.

Executes the current over data source and returns it's results as a DataSet

Executes the query

Gets data source identifier that represents the location from which the data are obtained.

Gets the default order by columns

Gets the default single column for the query

Gets the default source

Gets an enumeration of data records representing the result of this query. If Properties has CheckPermissions set to true, the resulting data records are filtered based on permissions.

Asynchronously gets an enumeration of data records representing the result of this query. If Properties has CheckPermissions set to true, the resulting data records are filtered based on permissions.

Gets enumerable collection of TObject representing the result of this query. Version data are applied to the resulting objects.

Asynchronously gets enumerable collection of TObject representing the result of this query. Version data are applied to the resulting objects.

Gets the typed enumerator

Gets the query to execute against database

Gets a query expression representing this object as a value

Gets the query expressions

Gets the full query text including resolved parameters

Serves as a hash function for a particular type.

Gets the ID column for this query

Gets the result as a list of values from the first column that the query returns. Excludes null values from the result.

Gets a multi-query for execution

Returns object type of objects returned by this query

Gets the list of queries for multi query

Executes the query using DB data reader. The SupportsReader flag indicates whether this operation is supported.

Asynchronously executes the query using DB data reader. The SupportsReader flag indicates whether this operation is supported.

Executes the current query over data source and returns it's results as an IDataReader. The method is effectively a wrapper around GetDataFromDataSource based on CreateDataReader.

Asynchronously executes the current query over data source and returns it's results as an IDataReader. The method is effectively a wrapper around GetReaderFromDataSource.

Executes the query using DB data reader.

Asynchronously executes the query using DB data reader.

Gets results from executing query

Gets the scalar

Attempts to get a single query if multi-query is defined only by a single query

Attempts to get a single query for the whole result based on the current state of the query object

Gets a source for this query

Returns specifically typed instance of current Query object to allow user to compose Query in fluent syntax. If current Query is immutable then its clone is returned.

Returns the where condition which filters the default query data for specific types

Gets the where condition for the given column

Gets the where condition for the given column

Specifies the columns to group by

Returns true if the given query is an external source

Returns true, if the query returns any results

Adds the given having conditions to the query.

Adds the given where condition to the query. Creates a new where condition object and runs the setup actions on it.

Specifies the having condition

Makes this object instance immutable, and next subsequent modification starts with a clone of the object.

Adds the data parameters to the current query parameters

Initializes the typed result

Ensures that only documents in relationship with a specified document are retrieved.

Gets the intersection of this data query with another query

Ensures that latest version of the documents is retrieved.

Loads the number of total records for an unpaged query

Loads the number of total records for a paged query

Modifies all inner queries with the given parameters

Modifies single inner query with the given parameters. Operation is not supported if multi query doesn't represent a single query source

Ensures that only documents within specified nesting level are retrieved.

Creates a new DataSet for the query results

Creates a new empty query

Clears the current group by, reverting the source of data to the original. Note, that this method also resets the existing having condition which is closely bound to the group by.

Clears the current having condition

Clears the current where condition

Adjusts the query to a next page, using the current page size. Use in combination with PagedBy and NextPageAvailable to iterate over the data in batches.

Sets the query to return no columns at all

Sets the query to return no columns at all

Sets the where condition to exclude all data from result

Sets up the query to become not paged query and output all results at once.

Filters the data to include only records on the current site.

Ensures that only coupled columns will be included in the results.

Filters the data to include only global objects.

Filters the documents to include only records on the given site.

Changes the where operator to OR for next where conditions. Use in combination of methods Where...

Adds the given where condition with the OR operator

Adds the given where condition with the OR operator. Creates a new where condition object and runs the setup actions on it.

Adds the columns to the order by query

Adds the columns to the order by query

Adds the columns to the order by query to order by the given columns in ascending order

Sets the default order by for the query

Adds the columns to the order by query to order by the given columns in descending order

Specifies the page to select with given page index and page size. Page number is indexed from 0 (first page)

Sets up the query as a paged query with the given page size. Resets the page index to first page. Use in combination with NextPageAvailable and NextPage to iterate over the data in batches.

Filters the data to include only documents on given path(s).

Filters the data to include only documents on given path.

Ensures that only documents published on a live site are retrieved.

Ensures that published version of the documents is retrieved.

Replaces the selected column with a new name

Replaces the selected column with a new name

Replaces the selected column with a new name

Flushes the results but leaves the generated query text unchanged. After the reset, query can be executed again to obtain new data.

Resets the where operator to the default value

Resolves the columns in the given list

Resolves the given type into corresponding types

Sets the column to select

Sets the column to select

Sets the columns to select

Sets the columns to select

Sets the columns to select

Adds the columns to the order by query

Adds the columns to the order by query

Adds the columns to the order by query to order by the given columns in ascending order

Adds the columns to the order by query to order by the given columns in descending order

Sets the query to return no results. This action is irreversible, once the query is set to return no results it cannot be changed. This method is used by data engine to forbid access to data that are not allowed to be accessed (e.g. license limitations), without notifying the process about the fact.

Transforms the current result

Sets class name for current query

Creates an immutable snapshot of the current query as a base for further evaluation. Doesn't modify the original query in any way.

Defines the source of the data (table, view or a nested query)

Identity method to make the query expression more readable. Use before the Columns or Page method. Doesn't provide any functionality.

Identity method to make the query expression more readable. Use before the OrderBy method. Doesn't provide any functionality.

Selects only first top N number of records

Returns the string representation of the expression

Returns the string representation of the expression, with possibility of expanding parameters

Includes given type with optional parameters. When additional parameters are specified, the query always executes using sub-queries for individual types. If only type is specified, the query allows usage of the default query and additional data from sub-queries may not be included.

Includes the given types to the resulting query

Gets the union of this data query with another query

Gets the union of this data query with another query without eliminating the duplicities

Adds the given where conditions to the query

Adds the given where condition to the query. Creates a new where condition object and runs the setup actions on it.

Adds the given where condition to the query

Adds the given where condition to the query. Matches the column value with an unary operator.

Adds the given where condition to the query. Matches the column value with an unary operator.

Adds the given where condition to the query. Matches the column to a given value.

Adds the given where condition to the query. Matches the column to a given value.

Matches the given condition on any column with the same type as the given value type.

Adds condition to all items that contain given text in any of the string columns. Performs a SQL substring search on the data.

Adds the condition for a string column to contain some substring

Adds the condition for a string column to contain some substring

Adds the where condition for a null or empty column value

Adds the condition for a string column to end with some prefix

Adds the condition for a string expression to end with some prefix

Adds the given where condition to the query. Matches the column to a given value.

Adds the given where condition to the query. Matches the left side to the given right side.

Adds the given where condition to the query. Matches the column to a given value or null value.

Adds where condition with EXISTS and the nested query "EXISTS (...)"

Adds where condition with EXISTS and the nested query "EXISTS (...)"

Adds the where condition for a false column value (boolean column equals false).

Adds the where condition for a false expression value (boolean expression equals false).

Adds the given where condition to the query. Matches the left side which is greater or equal than the right side.

Adds the given where condition to the query. Matches the left side which is greater or equal than the right side.

Adds the given where condition to the query. Matches the left side which is greater than the right side.

Adds the given where condition to the query. Matches the left side which is greater than the right side.

Adds the where condition to match the ID to the query. In case the column name is not provided or unknown, does not generate where condition. If given ID is invalid, adds the condition to match NULL.

Adds where condition to the nested query, e.g. "columnName IN (...)"

Adds where condition to the list of values, e.g. "columnName IN (...)"

Adds where condition to the list of values, e.g. "columnName IN (...)". Supported generic type is int, long, string or guid ONLY!

Adds where condition to the list of values, e.g. "columnName IN (...)"

Adds the given where condition to the query. Matches the left side which is less or equal than the right side.

Adds the given where condition to the query. Matches the left side which is less or equal than the right side.

Adds the given where condition to the query. Matches the left side which is less than the right side.

Adds the given where condition to the query. Matches the left side which is less than the right side.

Adds the given where condition to the query. Matches the column to a given value using LIKE operator.

Adds the given where condition to the query. Matches the left side and right side using LIKE operator.

Adds the negation of the given where condition

Adds the condition for a string column not to contain some substring

Adds the condition for a string column not to contain some substring

Adds the where condition for a non empty column value

Adds the condition for a string column not to end with some prefix

Adds the condition for a string column not to end with some prefix

Adds the given where condition to the query. Matches the column which is not equal to a given value.

Adds the given where condition to the query. Matches the left side which is not equal to the right side.

Adds where condition with NOT EXISTS and the nested query "NOT EXISTS (...)"

Adds where condition to the nested query, e.g. "columnName NOT IN (...)"

Adds where condition to the list of values, e.g. "columnName NOT IN (...)"

Adds the given where condition to the query. Matches the column to a given value using NOT LIKE operator.

Adds the given where condition to the query. Matches the left side and right side using NOT LIKE operator.

Adds the where condition for a not null column value

Adds the where condition for a not null expression value

Adds the condition for a string column not to start with some prefix

Adds the condition for a string column not to start with some prefix

Adds the where condition for a null column value

Adds the where condition for a null expression value

Adds the condition for a string column to start with some prefix

Adds the condition for a string column to start with some prefix

Adds the where condition for a true column value (boolean column equals true).

Adds the where condition for a true expression value (boolean expression equals true).

Sets the where condition for a specific object code name

Adds the comment to the given query

Ensures that coupled columns will be included in the results.

Defines how coupled columns will be included in the results.

Sets the where condition for a specific object GUID

Sets the where condition for a specific object ID

Changes the query to use the given object type. Applies the object type condition to the query. The new object type must have the same class name as the original one.

Applies the given parameters to the query

Applies the given parameters to the query

Sets the given DataSet as the source of the data query

Sets the given source as the source of the data query

Filters out objects which have their 'Expiration' column's day (e.g. Expiration) before currentDateTime.